Hello, i just bought a couple of door sensors but i would like to connect them (wired) with existing integrated door sensors that i have installed in my doors.
Would you please share me the pin-out of the door contact so that i can do that?
Simple job if i have the pin-out because the print of the sensor is great quality!
Hope to hear from u guys, Thanks!
if someone got this info for me please let me know, thanks in advance
Hello,
are you interested in power supply pinout to make them connected via constant power supply or do you want the to know about door open/closed signal?
Hi! I want to know because i want to connect it to the door-contact that i already have (a professional model witch is build into my doorframe and connected to my alarm system as well). So if i know the pin-out of the tedee board i will be able link it at the tedee eco system as well…. That’s the only solution to use the tedee doorlock in a user friendly way to make the lock work as i want to to work. I wish there were more options in open/close/trigger etc like many people already been asking for a long time now but faalt i think it Will never come:-( I want to open a door using a nfc reader connected to the dry-contact on a door without a handle (from the outside) while the doorlock is during the day in a so called “daytime position” instead of the “nightposition” (fully closed). At this moment it is not possible to use the doortrigger if the lock isn’t completely “closed” so i have to use the auto close function on the tedee door-sensor because thats the only “work around”.
I think I don’t have great news for you. The pinout you see on the edges of the PCB - these pins are mostly unused in Door Sensor. Some of them are used during testing, turned off later in production.
There is no clear door open/close indicator as logical 0 or 1. There is also no input to enforce door state change. There are 2 magnetic sensors on board connected via communication bus directly to main processor, so there is no clear connection point which can tell you about door state.
There is also no communication protocol exposed on these external pins.
To summarize: I really don’t see any entry point/integration possibility without changing the firmware of the device.