Configurable pull spring behaviour with lock button

Feature Requests
1

If “automatic pull spring” is activated an unlock via the lock button also pulls the spring. This is unnecessary/inconvenient most times. For my part I fetch keys/phone/whatever while the lock is working and then use the door handle to open. With pulling the spring the door is open in the meantime.

Please add an config switch to enable/disable pulling the spring when using the lock button.

Different locking/opening options
2

I agree the button should have some additional options/logic since the desired action differs inside to outside. In my case I’d like the opposite of you where the button can only pull the spring, even when unlocked. Either way, independent customisation of the button would be helpful

1 Like
3

How do you lock manually when the button only unlocks and/or pulls the spring?

And why use a button when the door is unlocked and the handle is already there/in reach?

4

In my case I don’t have a handle, the lock/escutcheon is the handle. So arguably in my case there’s no need to ‘lock’ the door. I have sorted a workaround in my case where Ive enabled instant auto-lock when the door closes, since I have the door contact sensor. This means that pressing the lock will always unlock and pull now.

5

Ciao, avrei la stessa richiesta

  1. Sblocco automatico al mattino, senza tirare la molla, esco di casa utilizzando la miniglua della porta, ma sblocco o solo tirare la molla quando rientro a casa.
  2. Quando comando alexa o Google home/gemini di aprire la porta deve anche tirare la molla sia che la serratura sia bloccata che sbloccata. Se do il comando necessito che la porta si apra e non sblocchi solamente.

Se imposto solo sblocca senza tirare la molla poi va in conflitto con sblocco e tira la molla

6

Hi, I have the same request

1. Automatic unlocking in the morning, without pulling the spring, I leave the house using the door mini-lock, but I unlock or just pull the spring when I return home.

2. When I command Alexa or Google Home/Gemini to open the door, it should also pull the spring whether the lock is locked or unlocked. If I give the command, I need the door to open, not just unlock.

If I set it to just unlock without pulling the spring then it conflicts with unlocking and pulling the spring
3 lock actions can be implemented:

Block

Unlocking

Pull spring (regardless of whether the lock is locked or unlocked)

This way it would be easier to voice control with alexa/google/gemini/siri