# Battery Status | Showing percentage and protection status **URL:** \ **Category:** Feature Requests\ **Created:** [January 15, 2025, 11:50am UTC](https://community.tedee.com/t/battery-status-showing-percentage-and-protection-status/386 "2025-01-15T11:50:50Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![cl8081](https://yyz1.discourse-cdn.com/flex003/user_avatar/community.tedee.com/cl8081/32/113_2.png) [@cl8081](https://community.tedee.com/u/cl8081)\ **Post date:** [January 15, 2025, 11:50am UTC](https://community.tedee.com/t/battery-status-showing-percentage-and-protection-status/386/1 "2025-01-15T11:50:51Z")
Hi Tedee Team, First of all, great work so far! I’ve been very happy with my Tedee Go over the past two years. Recently, I encountered an issue where my smart lock became uncalibrated, and I was unable to open the door (thankfully, I had the physical key with me). Upon investigating, I noticed in the log that the battery level was around 19%, yet the app still displayed the battery status as “High.” Despite multiple attempts, I couldn’t recalibrate the lock. However, after replacing the batteries, the smart lock started working perfectly again. I’d like to suggest two improvements: 1. **Battery Status Detail** : It would be helpful if the app displayed the battery percentage alongside the current status (High/Medium/Low). 2. **Protection Mode** : Consider implementing a “protection mode” that activates when the battery level falls below a certain threshold. In this mode, the smart lock could disable non-essential features (e.g., full locking) to conserve power for emergency operations like unlocking the door. Thank you for your attention, and I hope these suggestions are helpful. ---
**Author:** ![Goaneat](https://yyz1.discourse-cdn.com/flex003/user_avatar/community.tedee.com/goaneat/32/124_2.png) [@Goaneat](https://community.tedee.com/u/Goaneat)\ **Post date:** [March 14, 2025, 8:06am UTC](https://community.tedee.com/t/battery-status-showing-percentage-and-protection-status/386/2 "2025-03-14T08:06:27Z")
Hi, I join this discussion, for me too it would be ideal to display the percentage of available battery (25% 50% 75% 100%) ---
**Author:** ![Gemhalljan](https://avatars.discourse-cdn.com/v4/letter/g/f9ae1b/32.png) [@Gemhalljan](https://community.tedee.com/u/Gemhalljan)\ **Post date:** [March 15, 2025, 8:58am UTC](https://community.tedee.com/t/battery-status-showing-percentage-and-protection-status/386/3 "2025-03-15T08:58:56Z")
I agree, Battery percentage is a must with this lock, it will make all the difference to changing a battery immediately or leaving it another while, like 45% versus 5%